PRODUCTS CENTER

Aluminum Mirror

ALUMINUM MIRROR
JH GLASS aluminum mirror use the most advanced vacuum magnetron sputtering technology to produce the environmental products through horizontal production line. All of our aluminum mirrors are produced by high quality distortion-free grade float glass and can be coated both single and double layers. We stock a comprehensive range of aluminum mirror products to ensure the fastest delivery. All of our aluminum mirror can be cut to any size and shape and finished with polished or beveled edges. Mirrors cut to size can have safety back, acid etch, sandblast, hole drilling etc. We pride ourselves on giving you a friendly yet professional service and we aim to provide you with complete satisfaction.
 
SPECIFICATIONS:
1. Available Color: clear, bronze, euro grey, F green, light green, dark blue, light blue etc;
2. Back Paint: grey, green, blue;
3. Thickness: 0.7mm, 1.1mm, 1.3mm, 1.5mm, 2mm, 2.5mm, 3mm-6mm, 8mm, 10mm;
4. Size: 609mmx914mm, 914mmx914mm, 914mmx1220mm, 1220mmx1830mm, 1830mmx2440mm, 1524mmx2134mm, 2140mmx3300mm etc;
5. Other Processing: safety film CAT I & CAT II, silkscreen print, frosted, acid etch, framing etc;
6. Edge Work: clean cut, seam edge, matte, flat/pencil polish edge, bevel edge, drilled hole, water jet cutting etc.
 
ADVANTAGES:
1. 3 advanced aluminum mirror production lines, annual output: 5000,000.00sqm;
2. Coated on high quality distortion-free grade float glass, check each glass before mirror coating process;
3. Actual and accurate reflection, reflective rate≧88%, high durability which attract more and more customers to use aluminum mirror instead of silver mirror;
4. Environmental friendly;
5. Both single and double coated water-proof layers;
6. Easy to be cut, polish, beveled, safety back, acid etch and installation;
7. More than 15 years in mirror manufacturing and exporting, and owns a mature and integral QC system, professional sales team.
 
PRODUCTION:
1. Aluminum layer
Aluminum layer is the reflecting layer made by vacuum magnetron sputtering technology, and owns reflection performance for visible light. The aluminum film should cover the float glass surface completely.
2. Paint layer
The paint layer is used for protecting the aluminum layer. JH GLASS usually do single paint and double paint. To distinguish from base coat and top coat, the two layers should have different colors, but well-proportioned too. According to single paint, the layer thickness cannot be lower than 26μm. As for double paint, the layer thickness cannot be lower than 45μm.
3. Production process:
 
4. Lead content test: according to the CPSIA section 101(f)-Lead in paint/similar surface coating material standard, through SGS test, JH aluminum mirror lead content is: 0.002%, harmless to human beings.
 
ALUMINUM MIRROR QUALITY CONTROL STANDARD:
     

 

Hangzhou Jinghu Glass Co., Ltd

Copyright © JH Glass All rights reserved.